Tilt Lock Machine Vice Unbreakable Ductile Iron Cast Body

APEX Code 735 & 735P

Tilt Lock Machine Vice Unbreakable Ductile Iron Cast Body
(735 - Swivel Model)
(735P - Plain Model)
(Size : 4", 5", 6", 8")

701
Features :
  • Tilt Lock Machine Vice design is beamlike with two vertical and horizontal rails connected to the base.
  • You can hold piece parts in the most immobile state possible.
  • Flame Hardened Bed.
  • All parts interchangeable and available as spares.

Three Basics in precision Clamping
  1. That the movable jaw does not lift off the bed.
  2. That the body is rigid, and that a minimum amount of bending stresses are created in the clamping area.
  3. That deflection of the stationary jaw is minimized.
  • Totally enclosed toughened Screw.
  • Accuracy in Parallelism & squareness within 0.02 mm.
Construction :
  • Unbreakable ductile iron cast body. Die Steel (EN-31) hardened & ground jaws.
  • In addition to the rigid design charactereristics, a large heavy nut is drawn up againest the machined ways on the inside vice as the movable jaw is drawn down. This creates a heavy mass of material under compression and extremely resistant to bending stresses.
  • 4 Jaws Plate positions allowing extra capacity with the jaw plates in the outside position.

Specifications
Size in Inches 4 5 6 8
Width of Jaws (in mm) 100 125 150 200
Depth of Jaws (in mm) 37 40 48 60
Between Jaws position 1 (in mm) 110 125 160 225
Between Jaws position 2 (in mm) 160 185 227 310
Between Jaws position 3 (in mm) 230 270 315 420
Between Jaws position 4 (in mm) 280 330 380 505
Width Overall (in mm) Code 735 230 260 310 405
Width Overall (in mm) Code 735P 190 221 248 309
Height Overall (in mm) Code 735 140 165 163 221
Height Overall (in mm) Code 735P 100 123 128 165
Tenon Slot Size (in mm) 16 20 20 20
Length Overall (in mm) 360 410 480 620
Weight (app. in Kgs.) Code 735 21 35 44 91
Weight (app. in Kgs) Code 735P 15 25 34 63